A practical starting point for your next board

Snowboard Size Calculator & Size Chart

Find a recommended length range, a suggested place to start, and boot-based width guidance. See why each part of the result appears below.

Find your fit

A few details, one clear starting point

Enter your details below. Your result is a general starting point for comparing specific boards.

01

Your body

Weight sets your recommended length range.

Measurement system
02

Your boots

Boot size helps with board width guidance.

Use your snowboard boot size. Half sizes are supported.

US boot system
03

How you ride

These choices suggest where to start within the length range.

Riding level
Riding style

Get a length range and boot-based width reference.

Your result

Enter your details to get a snowboard size range.

How the Snowboard Length Calculator Works

Your weight selects a published snowboard length range. Riding level and style then suggest where to start within that range; boot size provides separate width guidance. Use the result as a starting point, then check the size chart for the board you want.

Snowboard Size Chart

Published adult rider weight to snowboard length guidance, shown exactly as published.

Adult rider weight and the published recommended snowboard length
Rider WeightRecommended Snowboard Length
<75–100 lb137–143 cm
95–110 lb140–145 cm
105–120 lb142–147 cm
115–130 lb144–149 cm
125–140 lb146–151 cm
135–150 lb148–153 cm
145–160 lb150–155 cm
155–170 lb152–157 cm
165–180 lb154–159 cm
175–190 lb156–161 cm
185–200 lb158–163 cm
195–210 lb160–165 cm
205–220 lb162–167 cm
215–230 lb164–169 cm
225+ lb165+ cm
  • The published chart includes a <75–100 lb row. The current SizeMyGear calculator provides finite length recommendations only for 75–230 lb inputs.
  • This is a general adult sizing reference.
  • Weight is used as the primary length factor in the current SizeMyGear calculator.
  • Specific snowboard models can use different sizing guidance.

Snowboard Size by Height and Weight

Weight drives the length range in this calculator. Height can add context, but a board reaching your chin or nose alone is not a reliable size test: riders of the same height can differ in weight, boot size and riding goals. The chart above pairs weight with published length ranges; it is not a height-based conversion chart.

Boot size informs width, while riding level and style guide your starting point within the length range. Published manufacturer guidance does not support one consistent numeric height adjustment, so SizeMyGear V1 does not ask for height.

Snowboard Width Guide

Published generic boot size to snowboard waist width guidance. The published bands overlap, so one boot size can match more than one row.

US Men's

US Men's boot size to waist width
Boot Size (US)Waist Width
5–7.5236–245 mm
7–9.5246–250 mm
8.5–10.5251–254 mm
9.5–11.5255–259 mm
10.5+260+ mm

US Women's

US Women's boot size to waist width
Boot Size (US)Waist Width
Up to 6225–235 mm
6–8.5236–245 mm
8–10.5246–250 mm
10+251–254 mm
  • These are general waist-width references, not universal requirements.
  • Actual fit can also depend on boot outsole length, binding angles and board shape, as well as the specific manufacturer's sizing guidance.
  • The calculator may combine overlapping generic ranges when presenting your personal width guidance, while this table preserves the published source rows.

Example Snowboard Sizing Scenarios

These examples use the same calculation as the form above. They are starting points, not model-specific size recommendations.

  • Lighter beginner

    125 lb · US Women's boot 7 · Beginner · Freestyle / Park

    Recommended range: 144–149 cm · Starting point: 144–145 cm (More Playful)

    Beginner freestyle riding points toward the shorter end of the weight-based range.

  • Intermediate all-mountain rider

    175 lb · US Men's boot 9 · Intermediate · All-Mountain

    Recommended range: 154–159 cm · Starting point: 156–157 cm (Balanced)

    This general-purpose profile starts in the middle of its published length range.

  • Advanced freeride rider

    195 lb · US Men's boot 10 · Advanced · Freeride

    Recommended range: 158–163 cm · Starting point: 162–163 cm (More Stable)

    Freeride shifts the starting point toward the longer end of the weight-based range.

  • Rider with larger boots

    155 lb · US Men's boot 12 · Intermediate · All-Mountain

    Recommended range: 150–155 cm · Starting point: 152–153 cm (Balanced)

    The larger boot changes width guidance, not the weight-based length range.

How Snowboard Sizing Works

Weight
Weight is the primary factor for snowboard length in SizeMyGear and sets the base recommended range.
Boot Size
Boot size is used for waist-width guidance, so you can check whether a regular or wider board may need consideration.
Skill Level
Skill level helps determine whether the calculator favors the lower, middle or upper part of the published length range.
Riding Style
Riding style also affects whether the calculator favors a shorter, balanced or longer starting zone.

Height

Height can provide additional context in snowboard sizing, but published manufacturer guidance does not support a consistent numeric height adjustment, so SizeMyGear V1 does not use height in its recommendation.

The three length zones

The recommended range is split into three zones, and the calculator highlights one of them as a starting point.

  • More Playful

    Quicker and easier to maneuver

    Tends to sit toward the shorter end of the published range, which may feel quicker and easier to maneuver.

  • Balanced

    A versatile starting point

    Tends to sit in the middle of the published range and works as a general starting point.

  • More Stable

    More stability and float

    Tends to sit toward the longer end of the published range for more stability and float.

Methodology & Sources

The calculator is built from two clearly separated layers: published third-party sizing data, and the SizeMyGear rules that turn that data into a recommendation.

Published source data

These are public sizing charts and guidance documents. SizeMyGear stores the published rows exactly as published, including overlapping and open-ended rows.

SizeMyGear logic

SizeMyGear does not reproduce or claim to use the internal calculator formula of Jones, evo, or any manufacturer.

The published data is turned into a recommendation in five deterministic steps:

  1. Published weight ranges are matched against the rider's weight.
  2. One finite base range is selected with deterministic SizeMyGear rules. No interpolation is used and no new range is invented.
  3. That base range is split into lower, balanced and upper zones, covering every whole centimetre exactly once.
  4. Skill level and riding style select a starting zone. The published 1–3 cm style adjustments are deliberately not applied mechanically.
  5. Published boot-size guidance provides a waist-width reference for the same boot size.

The zone selection described above is SizeMyGear logic applied to published ranges. It is not a third-party official formula, and it is documented in the project source alongside the data it uses.

Height can provide additional context in snowboard sizing, but published manufacturer guidance does not support a consistent numeric height adjustment, so SizeMyGear V1 does not use height in its recommendation.

The 225+ lb open-ended overlap

The published Jones chart contains an overlapping 225+ lb / 165+ cm open-ended range. For 225–230 lb inputs, SizeMyGear keeps the finite 215–230 lb range as the practical calculation range and surfaces the overlap as a source note.

Limitations

  • The result is a general sizing starting point, not a guarantee for a specific board.
  • Model-specific geometry can differ between boards of the same length.
  • Volume-shifted boards can use very different sizing.
  • Check the manufacturer's size chart for the specific board before buying.

FAQ

  • What size snowboard should I get?

    Start from the published length range for your body weight, then use your riding level and riding style to decide whether the lower, middle or upper part of that range is the better starting point for you. Boot size is used separately for waist-width guidance. Before buying, check the size chart for the specific model you are considering.

  • Is snowboard size based on height or weight?

    Weight is the primary factor for snowboard length in SizeMyGear. Height can provide additional context, but published manufacturer guidance does not support a consistent numeric height adjustment, so SizeMyGear V1 does not use height in its recommendation. Check the specific board manufacturer's size chart before buying.

  • Should beginners choose a shorter snowboard?

    The current calculator tends to favor the lower part of the published range for beginners, which may be easier to maneuver while learning. That is a starting point rather than a rule, and model-specific guidance still matters.

  • What snowboard size is best for freestyle?

    The current calculator tends toward the lower part of the published range for freestyle and park riding. Freestyle riders who prioritize larger jumps and landing support may prefer a longer size.

  • Should I size up for powder?

    The current calculator tends toward the upper part of the published range for powder riding. Volume-shifted powder boards can use very different sizing, so check the model's own guidance as well.

  • Do I need a wide snowboard?

    That depends on your boot size and the geometry of the specific board. The calculator uses published generic waist-width guidance and may also show manufacturer-specific reference data for larger boots, but you should check the specific manufacturer's guidance before buying.

  • What if I am between snowboard sizes?

    The calculator splits the published range into a lower, balanced and upper zone and highlights one of them as a starting zone. The shorter zone tends to feel more playful, the middle zone is a general starting point, and the longer zone tends toward more stability.

  • Is this snowboard calculator manufacturer-specific?

    No. It combines published source data with transparent SizeMyGear selection logic. It is a general starting point and does not replace the size chart for a specific board model.